Need some help unlocking the MDI on Haas NG Controller I recently purchased a 2018 Haas DM1 with NG Controller, and I'm new to the NG controller ( My DM-2 has the Pre NG )

So I'm trying to work my way...
https://www.cnczone.com/forums..../haas-mills/469288-n

Problem G30 Macro won't run Trying to use this macro for auto setting a G30, I got this from this site(thank you) and put it on a few machines with no issues fanuc 18, 21i 31i...
https://www.cnczone.com/forums..../fanuc/469290-g30-ma

Problem Spindle seize We have a new VF4-SS and the spindle bearings just seized up. Air line pressure was a little high around 110 psi. The auto lube system appeared to be...
https://www.cnczone.com/forums..../haas-mills/469292-s

Makino PMC E Bit Tracing back signals in PMC 2 Ladder and there are alot of E contacts that do not have coils in PMC 2 or PMC 1. They are not coming from the PLC...
https://www.cnczone.com/forums..../cnc-machining-centr

Optimum mb4 mill Conversion Im looking at this unfinished conversion to buy. (In NZ $)

What do you think ?
...
https://www.cnczone.com/forums..../cnc-do-it-yourself-